Use your fanart.tv username and password to login to this forum, if you don't have one, clicking on register will take you to the registration form on fanart.tv

Getting moire pattern in scans

Talk about anything Gimp

Re: Getting moire pattern in scans

Postby akovia » Sun Jan 18, 2015 2:46 am

Very nice ZincRider.
I remember I had troubles with the descreen plugin as well when I first installed it, but it's been so long I don't remember what it was. I know you want to make sure there is no alpha channel in the image.
The best thing about it is being able to try different values quickly and easily without the manual work.

descreen.jpg
gimp descreen plugin
descreen.jpg (38.63 KiB) Viewed 4648 times


Are you getting errors or nothing at all?
My body may be aging rapidly, but my mind is still tarp as a shack!
Getting Started
Navigating Fanart.tv
Why Your Image May be Denied
Moderation Time
Unwritten Rules
User avatar
akovia
Admin
Admin
 
Posts: 421
Joined: Wed Dec 18, 2013 3:37 pm

Re: Getting moire pattern in scans

Postby ZincRider » Sun Jan 18, 2015 4:56 am

Ha! I just got it working using a Gimp build from http://www.partha.com/, which comes with the FFT plugin. For some reason the one I installed manually never showed up in the menu.

The script is pretty neat.. It does the Fourier transformation much faster than G'MIC, which is a huge plus for me. Also gives me better control over parameters.
Not sure if despeckle is doing anything, though.
ZincRider
Veteran
Veteran
 
Posts: 80
Joined: Sun Jan 11, 2015 7:55 pm

Re: Getting moire pattern in scans

Postby hslansky » Fri May 08, 2015 9:39 pm

Akovia,
Would it be possible for you to make the cleanup video available again, the link on the previous posts returns a 404 error. I just purchased a new Epson Perfection V600 scanner and I am having a terrible time trying to remove the moire patterns from the scanned images. I have read and tried several techniques but I am not having much success. Any hints/suggestions would be appreciated.

Thanks
hslansky
 
Posts: 12
Joined: Mon Mar 09, 2015 1:54 pm

Re: Getting moire pattern in scans

Postby ZincRider » Fri May 08, 2015 11:55 pm

You should get useable (but blurrier than necessary) results with the descreening option your scanning software offers. Make sure to set it to "fine prints" and turn off the sharpening option.

Descreening with the FFT plugin can be really frustrating and tricky, but the results are often amazing. You could start by just greying out the stars that are arranged in circles around the center galaxy. To remove stars that are located on the center galaxy I use the healing brush (I seem to get less intense artifacts that way).

Maybe you could post a scan and we could all try and descreen it using our preferred techniques, so you can see the potential of your image...
ZincRider
Veteran
Veteran
 
Posts: 80
Joined: Sun Jan 11, 2015 7:55 pm

Re: Getting moire pattern in scans

Postby hslansky » Sat May 09, 2015 12:37 am

I have attached a few images as you suggested. They were all scanned using the Epson Scan software, 24-bit color image, 600 DPI, De-Screening set to Fine Prints and Unsharp Mask turned off.

https://www.dropbox.com/s/y7pcdv09ukeal ... D.jpg?dl=0

https://www.dropbox.com/s/11ips712qbxxk ... D.jpg?dl=0

https://www.dropbox.com/s/mmt8y3y9fnqg7 ... r.jpg?dl=0


Reading articles on the Internet can be very confusing on this topic. For example, you recommended turning on the software's de-screen function, however, many articles suggest not using the scanner software for this function and de-screening using software such as Gimp or Photoshop. Is one method better than the other? Should I be looking at other scanning software?

Thanks
hslansky
 
Posts: 12
Joined: Mon Mar 09, 2015 1:54 pm

Re: Getting moire pattern in scans

Postby ZincRider » Sat May 09, 2015 2:21 am

You can either let the scan software do the descreening or do it manually. If you do it manually you need to turn off the descreening option in your scan software.

The method your scan software uses (scanning at a higher resolution, adding blur and then scaling down) has its shortcomings, but it's very easy to use. Descreening using a fourier transformation can give much better results, but it's also a lot harder to get right.

In case of the cover, your scan software didn't use quite enough blur (the "magazine" setting might have been better for this particular cover), as some elements of the image have a bit of halftone and moire patterns - not a bad case, though; this is a nice scan and the print was of rather good quality as well. And of course you had unsharpen mask turned off, so the patterns weren't exaggerated. This leaves us a nice source image to work with.

Usually I'd pick just one method of descreening, but in this case we could simply add another one on top.

I had to descreen this one in two steps.
At first I let the descreen script for GIMP run with the following settings:

Image

Unfortunately this left me with some halftone and moire patterns on the faces of the people in the foreground.
I performed another fourier transformation and saw that with the script settings I had chosen, the innermost circle of stars couldn't be removed. I greyed them out manually and did an inverse fourier transformation. Now the patterns were gone, but I had strong artifacts around the titles and logo in the upper part of the image. Quite a bummer.

Then I exported the image and reversed my manual tweaks. Now I had a version with clean text and logo and a pattern in the foreground and one with no pattern, but messed up text. I used the best parts of each image to compose this:

http://picload.org/image/iaaowoa/how_to ... creene.jpg

There are artifacts along the top edge, but they should be easy to touch up.
ZincRider
Veteran
Veteran
 
Posts: 80
Joined: Sun Jan 11, 2015 7:55 pm

Re: Getting moire pattern in scans

Postby hslansky » Mon May 11, 2015 10:06 pm

Thanks for the great work on that poster, very much appreciated. What I am really trying to understand is the process so that I can do the work myself, I have many posters and discs that I am looking to scan. I tried FFT and the de screen plugin on the DVDs and wound up with grey images, after FFT inverse or the completion of the descreen plugin. They don't seem to have the star field that is talked about with FFT.

Are the any general guidelines or tutorials on how to approach removing the moire and half tone patterns? Would disc scans be handled differently than other art work?

Thanks
hslansky
 
Posts: 12
Joined: Mon Mar 09, 2015 1:54 pm

Re: Getting moire pattern in scans

Postby ZincRider » Tue May 12, 2015 12:35 am

Are you using the GIMP plugins or something for Photoshop?

I'm using the FFT plugin and descreen script for GIMP and they work fine for color images. G'MIC's fourier transformation also works, but it's much slower.
I know at least one FFT plugin for Photoshop requires an extra step for colour images. This tutorial will tell you how to do it: http://www.3d4x.ch/Swift%27s-Reality/FF ... okov/16,35

If you're on Photoshop, have you tried the plugin provided by http://www.descreen.net ? Looks rather well thought out and powerful.

Discs and other artwork are handled the same - but I gotta say, that Eddie Izzard disc is quite a pain to descreen. I'm getting better (but not good) results with some smoothing filters..
ZincRider
Veteran
Veteran
 
Posts: 80
Joined: Sun Jan 11, 2015 7:55 pm

Re: Getting moire pattern in scans

Postby hslansky » Tue May 12, 2015 12:59 am

I am using Gimp. Sorry, thought I had stated that.
hslansky
 
Posts: 12
Joined: Mon Mar 09, 2015 1:54 pm

Re: Getting moire pattern in scans

Postby ZincRider » Tue May 12, 2015 1:48 am

That's funny. Here's what my images look like after the FFT: http://picload.org/image/ialrlog/how_to ... poster.jpg
ZincRider
Veteran
Veteran
 
Posts: 80
Joined: Sun Jan 11, 2015 7:55 pm

PreviousNext

Return to Gimp Chat

Who is online

Users browsing this forum: No registered users and 1 guest